Bellevue · King County
Driveway Removal in Bellevue, WA
Old asphalt and concrete driveways, patios and walkways in Bellevue broken out, hauled on our own trucks and the base prepped for new concrete, asphalt or gravel. Serving Somerset, Newport Hills, Bridle Trails and Lake Hills.
Driveway removal in Bellevue: what is underneath
Mid-century homes in Lake Hills and Crossroads, hillside view homes in Somerset, and large new custom homes replacing older houses across the city. Older driveways here are often heaved by tree roots, cracked by wet winters, or laid over a base that was never built for the load.
Glacial till over most of the city, outwash sand in places, and soft deposits around the lakes and the Mercer Slough. Once the old surface is out, soft or organic material is removed and the subgrade is graded and compacted, because a new driveway on a bad base fails the same way the old one did.
Rolling hills between Lake Washington and Lake Sammamish, rising to steep slopes in Somerset, Newport Hills and the Cougar Mountain foothills. Slope and access decide the method: compact machines and short truck cycles on tight or sloped lots, more iron on open ground.
Common driveway removal projects in Bellevue
Old asphalt driveways
Decades-old blacktop in neighborhoods like Somerset broken out, hauled and the base prepped for new paving.
Concrete driveways and slabs
Cracked and heaved concrete driveways and slabs in Bellevue broken out and hauled for recycling.
Patios and walkways
Old patios, walkways and pads around Newport Hills homes removed with the driveway or on their own.
New gravel driveways
Old drives replaced with crushed rock driveways built on fabric for Bellevue wet winters.
What our driveway removal work in Bellevue covers
- Asphalt Driveway Removal
- Concrete Driveway Removal
- Patios & Walkways
- Haul-Off & Recycling
- Base Prep
- Gravel Driveways
Permits & Rules
Driveway rules in Bellevue
Removing a driveway usually does not need a permit, but changing the approach at the street, widening it or adding hard surface can need approval from the City of Bellevue. Outside city limits, the King County Department of Local Services handles it.
Every job starts with an 811 utility locate, because water, gas and power lines often run under driveways.
Cost & Timing
What affects the cost of driveway removal in Bellevue
We do not publish flat prices because no two Bellevue sites are the same. These are the things that move the number most here.
Slope and access
Steep Bellevue lots take smaller machines, more careful staging and sometimes engineering, which adds time compared with flat, open ground.
Soft ground
Where Bellevue soils are soft or wet, over-excavation, fabric and imported rock are often part of the job, and we price that in up front.
Buffers and permits
Work near Bellevue's rivers, creeks, lakes or shoreline can need permits and limits on where machines go. That affects scope and schedule more than price.
Size of the property
On Bellevue acreage, longer haul distances inside the property and bigger volumes change the math. Bigger jobs often cost less per unit.
Haul-off and disposal
How much material leaves the site, and what it is, drives cost. Our own trucks keep that predictable on Bellevue jobs.
When to schedule driveway removal in Bellevue
Driveway Removal in Bellevue runs most of the year. In the wettest months we protect lawns and soft ground with mats, and on build sites we schedule it ahead of the excavation.
Bellevue's till soils hold water through the winter, which is when drainage problems show up. That is a good time to see where water goes, and the dry season is the time to fix it.
At higher elevations around Bellevue, snow and freeze can close the season early, so foothill and mountain-side jobs are best booked for summer and early fall.
Where We Work
Driveway removal across Bellevue
Bellevue covers a lot of ground, from lakefront and Bridle Trails horse properties to the steep hillsides of Somerset and Cougar Mountain. High-value homes, steep slopes and a careful permit desk make planning the most important part of any job here.
We remove driveways, patios and walkways across Somerset, Newport Hills, Bridle Trails, Lake Hills, Crossroads, Factoria, Woodridge and Lakemont.
Asphalt and concrete are loaded straight onto our trucks and hauled via I-405 and I-90 for recycling wherever possible, and we can build a new gravel driveway on the prepped base.
We also do driveway removal nearby in Kirkland, Redmond, Seattle and Sammamish. See everything we do in Bellevue, read our full guide to driveway removal, or browse all service areas.
Why DirtRaptor
Why Bellevue owners call us for driveway removal
Owner on the machine
On Bellevue jobs you talk to the person who walks the site, writes the quote and runs the equipment.
Trees and dirt, one crew
If trees are in the way of your Bellevue project, we take them down ourselves instead of waiting on a separate tree service.
Our own trucks
Haul-off and deliveries run on our schedule along I-405 and I-90, not a subcontractor's.
Built for slopes
We plan machine placement, drainage and erosion control for Bellevue's sloped ground before we start.
How a driveway removal job runs
- 01
Site Walk & Locates
- 02
Break Out & Load
- 03
Haul & Recycle
- 04
Base Prep
Real Jobs
Recent DirtRaptor work near Bellevue
Demolition · Edmonds, WA
Driveway Removal & Concrete Prep
Tearing out an old blacktop driveway and prepping the ground for a new concrete pour — broken material hauled off, base left clean and ready.
Demolition · Everett, WA
Condemned 100-Year-Old Shed Teardown
A 100-year-old shed, condemned and unsafe, brought down and hauled off — the site left graded flat and clean.
Questions
Driveway Removal in Bellevue: FAQs
How long does driveway removal take in Bellevue?
+
A typical residential driveway takes one to two days of machine time, depending on size, thickness and access.
Do I need a permit to remove my driveway in Bellevue?
+
Usually not for removal alone. Changing the street approach or adding hard surface can need approval from the City of Bellevue.
Can you build a gravel driveway after removal?
+
Yes. We prep the base, lay fabric where the ground is soft, and place and compact crushed rock built for wet winters.
How much does driveway removal cost in Bellevue?
+
It depends on the site, so we quote after a free site walk rather than guessing on the phone. The biggest drivers in Bellevue are usually slope and access, soft ground, buffers and permits. You get a written number with inclusions and exclusions spelled out.
When is the best time to schedule driveway removal in Bellevue?
+
Driveway Removal in Bellevue runs most of the year. In the wettest months we protect lawns and soft ground with mats, and on build sites we schedule it ahead of the excavation.
Do I need a clearing and grading permit in Bellevue?
+
It depends on the volume of soil moved and the area disturbed, and steep slopes or critical areas lower the threshold. We estimate the quantities during the site walk and tell you whether a permit is likely.
Can you do excavation on a steep Somerset lot?
+
Yes. Steep lots need careful machine placement, erosion control and planned spoil haul-off so nothing is stockpiled on the slope. A geotechnical report is often part of the permit.
Will the work damage my lawn or street?
+
We stage trucks carefully and use mats where needed. Tracked machines spread their weight better than wheeled ones, and we clean up the street before leaving.
Ready for a real number in Bellevue?
Send the address and a few photos. We walk the site for free and come back with a written quote.
